EasyManua.ls Logo

Agria 3400 - Commissioning and Operation; Handling Safety References

Agria 3400
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
agria Two-Wheel Tractor 3400; 3400 KL 59
Safety references for the handling
ll
ll
l
Do not run the engine in closed areas, in which dangerous carbon monoxide
can accumulate itself.
ll
ll
l
Always wear
safety shoes
and long trousers during working. Do not operate the
machine bare-footed or in lightweight sandals.
ll
ll
l
Check completely the area, on which the machine is used, and remove all
articles, which can be out-thrown by the machine.
ll
ll
l
Only work at daylight or good lighting.
ll
ll
l
Always pay attention to a safe stand on slopes.
ll
ll
l
Only lead the machine in the step speed.
ll
ll
l
Always work transverse to the slope, never slope up or downward.
ll
ll
l
Be particularly careful, if you change the driving direction on slopes.
ll
ll
l
Do not work on excessively steep slopes.
ll
ll
l
Be particularly careful, if you turn the machine around or pull it to itself.
ll
ll
l
When hoeing and tilling on difficult ground (stony, hard etc.) the machine may
give sudden jerking movements in an upward and forward direction and therefore
extra care should be taken under these conditions.
ll
ll
l
Do not change the basic adjustment of the engine or overspeed the engine.
ll
ll
l
Start the engine carefully according to the instructions of the manufacturer
and respect on sufficient distance from the feet to the tools.
ll
ll
l
Never lead hands or feet to or under turning parts.
ll
ll
l
Never lift or carry the machine with running engine.
ll
ll
l
The engine is to be turned off: - if you leave the machine; - before you refuel.
ll
ll
l
Close the fuel tap after working.
ll
ll
l
Never keep the machine with petrol in the tank within a building, in which possibly
petrol vapors with open fire or sparks can come into contact or catch fire.
ll
ll
l
If the tank is to be emptied, this is to be accomplished outdoor.
ll
ll
l
Let the engine cool down, before you store the machine in closed areas.
ll
ll
l
Replace for safety reasons worn out or damaged parts.
4. Commissioning and Operation
4

Related product manuals