58 agria Two-Wheel Tractor 3400; 3400 KL
4
4. Commissioning and Operation
Working on Slopes
W
To prevent the tool carrier from sliding
on slopes make sure it is secured by
another person using a bar or a rope. This
person must stay at a higher position than
the vehicle and at a safe distance from the
attachment at work.
Always work transverse to the slope, never
slope up or downward.
Note for Mowing
After mowing or in case of grass clogging:
l
Set FR-ball handles to idle-position. The
mower comes to a stop but not the knives, thus
freeing the cutter bar from grass
l
Set PTO speed shift lever to position “0”.
Anti-Winding Devices
only differential version
For mowing long-stemmed plants, we recom-
mend fitting protecting devices on both hub
adapers to prevent plants from winding on.
Anti-winding kit: 3416 511
Petrol Engine:
max. 45° (100 %)
Diesel Engine:
max. 20° (37%)
4
To Next Page
Loading...
