Agria 3400 - Page 8

8 agria Two-Wheel Tractor 3400; 3400 KL
Figure C:
3 Tool kit
4 Handlebar
5 Clamping lever for height adjustment of steering handle
6 Hitch (floating drawbar)
7 Linch pin
8 Plug
9 Attachment bolts for wings and floating axle stop
10 Transmission oil filling opening and oil dip-stick
11 Eye bolt with cap nut, top
12 PTO
13 Link, PTO engagement
14 Eye bolt with cap nut, bottom
15 Weight mounting device and engine protection base
16 Stand
17 Name plate (on the right, in travel direction)
18 Oil dip-stick/oil control plug, oil filling opening, clutch case
19 Machine identification no. (on right side, hammered into housing)
20 Oil drain plug, gearbox
21 Hub adapter
22 Attachment bolt for hub adapters
25 Oil drain plug, clutch case
26 Operating hour counter
27 Disc brake
30 Relay (E-Start version)
31 Fuse, relay under the cover (Recoil starter version)
32 Socket
33 Battery (on E-Start version only)
34 Start switch (on E-Start version only))
35 Battery charge control beeper (on E-Start version only)
Figure D:
1 PTO engagement lever
2 Bar locking lever
3 Push switch for safety circuit
4 Safety circuit lever
5 Clutch hand lever with safety hillholder and hand brake
(safety hillholder and hand brake but not on the "Overdrive" version )
6 Pawl for hand brake (but not on the "Overdrive" version )
7 Forward/Reverse ball handle
(with steering handle swivelled (front attachment) = Gear-shift ball handle)
8 Gear-shift ball handle
(with steering handle swivelled (front attachment) = Forward/Reverse ball handle)
9 Speed control lever
10 Differential lock lever
11 Differential lock pawl
14 Brake lever for central hand brake (on "Overdrive" version only)
Designation of Parts:
Diesel Engine / Differential Version