Edition 02.97 Power Mower 5400 49
5. Maintenance
Planetary Mowing Drive
Check lubrication (transmission flow
grease) each time you operate the
mower and after every 8 operating hours
(oil dip-stick 1) – machine is in operat-
ing position. Refill, if necessary.
Exchange transmission flow grease
once per year. We recommend to do this
before the season starts and when you
change engine and transmission oil.
Remove old grease by rinsing with
paraffine or diesel oil (drain plug 2). It is
advisable to have this work done by your
AGRIA workshop and to take the cutter
bar along for maintenance. This ensures
a properly working mowing attachment
during the mowing season.
Lubricate lubrication nipple on crank
stone before each operation and after
every 8 operating hours. Use Bio-lubri-
cating grease.
Lubricate gliding parts on mowing knife
before each operation and after every 8
operating hours. Use Bio-lubricating oil.
Knife Driver with Exchangeable
Distance Plates
(AGRIA no. 63220)
On new machines, the play between
crank stone and knife driver is set to max
0.3 mm. When the play is 0.5 mm, re-
place one distance plate. If the problem
re-occurs, also exchange distance plate
on opposite side. The attachment bolts
(M 6x16) must not project inwards.
Play Crank stone
Distance plate assembly kit
632 21
Crank stone
To Next Page
Loading...
