Remote-controlled All-electric Tool Carrier agria 9700e
4.3 Starting the machine - basic actions
Check the tightness of nuts and bolts.
The acoustic pressure level is less than 85 dB(A) from a dis-
tance of more than 3 m. If you are regularly closer to the ma-
chine than 3 m you should use protective ear plugs. Observe
the operating instructions of the mounted implement manufac-
turer.
Before starting the machine, make sure that no children or an-
imals are in the working area.
The working area must also be free of objects which could
come into contact with rotating parts of the mounted im-
plement. These could cause serious personal injuries and
damage to property or to the implement itself.
Check that the safety devices provided are functioning
properly before commencing work.
• Interference could be caused by third parties in the vicinity
using the same frequency. Make sure that no active trans-
mitters in the same frequency band are present in your vi-
cinity.
• Make sure that the battery of the remote control is fully
charged.
• Make sure that the fan filter is free of mowing residues or
other soiling.
• Before starting the mounted implement drive, make sure
that the mounted implement is not blocked. A mounted im-
plement blocked (by foreign objects) can cause damage to
the mounted implement or the mounted implement drive.
• Observe the sense of rotation and the speed the manufac-
turer prescribes for the mounted implement.
Carefully read the operating instructions of the remote control
and of the mounted implement before use.
To Next Page
Loading...