Remote-controlled All-electric Tool Carrier agria 9700e
Switch off the PTO shaft of the machine (B/8).
Park the machine in a safe place. Place the mounted imple-
ment on the ground (B/7).
Switching off the machine with the remote control:
You can stop the machine with the remote control by pressing
the EMERGENCY STOP switch (B/11) or by switching off the
remote control with the key switch (B/5).
Switching off the machine at the machine:
Press the EMERGENCY STOP switch (A/12).
Only pressing the EMERGENCY STOP switch (A/12) on the
machine will switch off the rechargeable batteries of the ma-
chine. The position of the machine are switched off.
Pay attention that the EMERGENCY STOP switches
(A/12 and B/11) of the remote control and machine are pressed
and leave them pressed down, as the rechargeable batteries
may gradually self-discharge under certain circumstances.
You have now switched off the machine.
Pressing an EMERGENCY STOP switch (A/12 or B/11)
in case of emergency causes the machine and the
mounted implement drive to switch off immediately.
Attention: The braking distance of the machine de-
pends on the ambient conditions. This is particularly im-
portant when you drive downhill! The parking brake takes
effect when the machine has come to a standstill.
To Next Page
Loading...