6 Troubleshooting and Remedies
Remote-controlled All-electric Tool Carrier agria 9700e
6 Troubleshooting and Remedies
Observe the safety instructions! Have faults on the machine that make a major intervention neces-
sary always repaired by a specialist agria workshop that has the necessary tools. Any improper interven-
tion can cause damage to the machine or override safety equipment, thus increasing the risk of injury
when using the machine.
6.1 Implement carrier
Mounted implement shaft does
not turn
V-belt of mounted implement drive too loose
V-belt of mounted implement drive defective
Mounted implement blocked by foreign object
The crawler tracks do not
move when the joystick is ac-
tuated
Crawler tracks are blocked by grass residues
or other foreign objects
Remove residues or blockage
Wiring on electric motors defective
Check wiring and replace if necessary
The crawler tracks run more
slowly than they should
Crawler tracks are hampered by grass resi-
dues or other foreign objects
Remove residues or blockage
Radio connection is interrupted
during operation
Distance between remote control and machine
is too great
Do not allow the distance to become too great
Inadequate hydraulic oil level
Check hydraulic oil level and top up if necessary
Hydraulic lines defective
Check hydraulic lines and replace if necessary
Lower link blocked by foreign object
Inadequate hydraulic oil level
Check hydraulic oil level and top up if necessary
Hydraulic lines defective
Check hydraulic lines and replace if necessary
Hydraulic unit does not oper-
ate
Inadequate hydraulic oil level
Check hydraulic oil level and top up if necessary
Electric activation defective