Remote-controlled All-electric Tool Carrier agria 9700e
4 Commissioning and Operation
4.1 Danger zone
Staying in the danger zone of the machine during
startup and operation is not permitted.
If the operator notices that people or animals are in the working
area, the machine must be switched off immediately and not
restarted until this area is clear.
The user is responsible for third parties in the working area
(entire area to be worked on).
Danger zone (1) Remote-controlled implement carrier:
3 m in front of and 3 m behind the machine, as well as 1 m to
the left and right of the machine:
Be sure to observe the danger zone of the mounted
implement!
Observe the mounted implement manufacturer’s operating in-
structions. The entire danger zone can be considerably en-
larged thereby.
Never stay below the machine on sloping terrain.
Never approach the machine from below on sloping ter-
rain.
4.2 Before starting the machine
Only put the machine into operation after all protec-
tive devices have been mounted, are functional, and in
protection position.
4.2.1 Charging the machine
To charge the machine, the machine must be switched off. Press the EMERGENCY STOP switch of
the machine (A/12) and the EMERGENCY STOP switch of the remote control (B/11).
The rechargeable batteries of the machine are not completely charged before delivery. Completely charge
the machine before working with it the first time.
Avoid soiling of the charging plug with oily or greasy substances. If the plug is soiled with oily or greasy
substances, switch off the machine and remove any oil or grease from the plug.
In case of coarse soiling, for example with mowing residues or foliage, switch off the machine and use
compressed air to blow out the plug.
Do not use any conductive tools to clean the plug of soiling. There is a risk of electric shock.
Do not make any changes to the battery charger settings!
Only store the machine in uninhabited and non-serviced rooms.
To Next Page
Loading...