Checking the crawler tracks for damage
Keep your hands away from crushing points when
moving the machine!
Check the crawler tracks (A/1) only when the machine is
switched off and the key has been removed from the remote
control. If the crawler tracks are partly inaccessible, move out
of the machine’s danger zone, start the machine and move the
machine forward, so that you can check the other part of the
crawler tracks. Switch off the machine again and remove the
key from the remote control. Now you can check the other part
of the crawler tracks.
Repeat the instructions above, until you have checked the en-
tire length of both crawler tracks. Have the crawler tracks
changed if they are damaged.
The crawler tracks must only be changed by a specialist work-
shop
or by - agria-Service -.
To Next Page
Loading...