Need help?Do you have a question about the Aichi SR12C and is the answer not in the manual?
General| Brand | Aichi |
|---|---|
| Model | SR12C |
| Category | Boom Lifts |
| Language | English |
Defines the duties of machine owners and users regarding safe operation and compliance with regulations.
Specifies the requirements for operating personnel, emphasizing training and authorization for safe operations.
Details risks associated with electric power lines and safe distances to prevent electrocution.
Outlines dangers of machine instability, exceeding load capacity, and improper operation.
Addresses risks of falling from the platform or using ladders improperly.
Covers risks of striking objects, people, or structures during travel and operation.
Emphasizes not operating damaged equipment and the importance of proper maintenance and decals.
Warns about risks when handling flammables and the need for fire safety equipment.
Details precautions for handling batteries, including acid and gas hazards.
Addresses scald hazards from hot engine parts and fire/explosion risks from fuel.
Covers fall hazards, exposure hazards, and risks associated with alcohol/drugs or illness.
Provides guidance on safe travel, especially on uneven surfaces, slopes, and avoiding obstacles.
Explains the meaning of various symbols and pictograms used on the machine.
Identifies the placement and meaning of critical safety signs and decals on the machine.
Provides an overview of the various safety systems incorporated into the machine.
Details how the system automatically limits travel speed based on boom status.
Explains how travel functions are disabled based on boom status and machine tilt.
Identifies and labels the major components of the machine with corresponding numbers.
Describes the function and operation of the controls located on the platform.
Details the function and operation of the controls located at the ground level.
Outlines a step-by-step visual inspection of the machine for leaks and damage before operation.
Details the functional checks of safety systems and machine operations before starting work.
Verifies the proper functioning of controls and safety systems from the lower control panel.
Verifies the proper functioning of controls and safety systems from the upper control panel.
Confirms the tilt warning system activates correctly when the machine exceeds tilt limits.
Ensures the machine adheres to speed limitations under specific operating conditions.
Provides instructions for properly storing the machine after use, including cleaning and lubrication.
Lists essential daily checks and procedures like refueling and fluid level checks.
Outlines maintenance tasks to be performed at regular intervals by qualified technicians.
Explains the procedures for starting the engine from both ground and platform controls.
Details the methods for safely shutting down the machine's engine.
Describes the safe use and functions of the control panel located on the platform.
Covers the operation of travel controls, speed selection, and safe traveling practices.
Explains how to operate boom elevation, rotation, telescoping, and fly jib functions.
Details the adjustment and air bleeding procedures for the platform leveling system.
Explains how to use the emergency stop button to halt all machine functions immediately.
Details the use of the emergency pump to lower the platform in case of main system failure.
Outlines necessary steps and precautions before transporting the machine.
Provides instructions on securely tying down the machine for safe transport.
Details safe procedures for lifting and hoisting the machine using slings or ropes.
Explains how to safely hoist the machine when the boom cannot be lowered first.
Lists key performance, measurement, power, weight, and function specifications for the models.
Visual representation of the machine's operational reach and working envelope for different models.
To Next Page
