Aichi SR12C - Workplace Check

󱒨󱓍󱓆󱓕󱓙󱓊󱓗󱒅󱒚󱒅󱒒󱒅󱒼󱓔󱓗󱓐󱓕󱓑󱓆󱓈󱓊󱒅󱒨󱓍󱓊󱓈󱓐
22
󱒨󱓍󱓆󱓕󱓙󱓊󱓗󱒅󱒚
WARNING
 Donotmovethemachinetothe
workplaceuntiltheworkplacecheckis
performed.
• Makesuretochecktheworkplacebefore
startingoperation.Makesurethereareno
followinghazards:
‒nearelectricpowerlinesandapparatus
‒ drop-offsorholes
‒slopedsurfaces
‒slipperyoricysurfaces
‒inadequatesurfacesupporttowithstand
allloadforcesimposedbythemachine
‒bumpsandfloorobstructions
‒curbs
‒debris
‒overheadobstructions
‒hazardouslocations
‒windandweatherconditions
‒presenceofunauthorizedpersons
‒otherpossibleunsafeconditions
• Removethehazards,ifany,afterthe
workplacecheck.Ifitisnotpossibleto
removethem,donotmovethemachineto
theworkplace.
• Themachinecanbeusedonlyonsurfaces
whicharefirmandforwhichall4wheelscan
maintaincontactevenlywiththeground.
WorkplaceCheck