Aichi SR12C - Tilt Warning Check; Limited Travel Speed Check

󱒨󱓍󱓆󱓕󱓙󱓊󱓗󱒅󱒛󱒅󱒒󱒅󱒵󱓗󱓊󱒒󱒸󱓙󱓆󱓗󱓙󱒅󱒨󱓍󱓊󱓈󱓐
25
Ifnoabnormalitiesarerevealedinsteps1〜21,
checkthefollowingusingtheuppercontrols:
DANGER
• Retracttheboomfullyandraisethe
boomtothehorizontalbeforechecking.
• Closeandlockthedoorsofthe
coverssecurelybeforeoperating.
Doorsopeningsuddenlythrough
themovementsofthemachineis
hazardous.
 TiltWarningCheck2‒4
󱒸󱓙󱓊󱓕󱒅󱒗󱒗
 Retracttheboomfullyandraisetheboomto
thehorizontal.
󱒸󱓙󱓊󱓕󱒅󱒗󱒘
 Raisetheflyjibtothehorizontal.(if
equipped)
󱒸󱓙󱓊󱓕󱒅󱒗󱒙
 Makesurethetiltlightgoesonandalarm
buzzersoundswhenthemachinetiltsmore
than5°,e.g.bytravelingupontoaslope
morethan5°(withinthegradeability).
 LimitedTravelSpeedCheck2‒5
󱒸󱓙󱓊󱓕󱒅󱒗󱒚
(1) Putthemachineonafirm,levelsurface.
(2) Extracttheboomapprox.1mandlower
theboombelowthehorizontal.
(3) Selectthetravelspeedselectswitchto
“HIGHSPEED”andattempttotravelathigh
speed.
(4) Makesurethemachinetravelsatlow
speed.
 LastCheck2‒6
󱒸󱓙󱓊󱓕󱒅󱒗󱒛
 Retractandlowertheboomfullyandturn
thekeyswitchto“OFF”toshutdownthe
engine.
󱒸󱓙󱓊󱓕󱒅󱒗󱒜
 Circlethemachineandcheckvisuallythat
therearenooilleaks.