Aichi SR12C - Platform Leveling System

󱒨󱓍󱓆󱓕󱓙󱓊󱓗󱒅󱒝󱒅󱒒󱒅󱒴󱓕󱓊󱓗󱓆󱓙󱓎󱓔󱓓
40
 PlatformLevelingSystem5.
 PlatformLevelAdjustment5‒1
Ifthepre-startcheckrevealsthattheplatform
istilted(front-backtiltofabout3°ormore),
adjustitasfollows.
M085FA20
PlatformLevelAdjustSwitch
fig.8‒30
M082L822
PlatformLevelAdjustSwitch
EnableSwitch
fig.8‒31
NOTICE
 Eveniftheplatformtiltisunder3°,
adjustitifthetiltmakesworkhard.
󱒸󱓙󱓊󱓕󱒅󱒖
 Putthemachineonafirm,levelsurface.
󱒸󱓙󱓊󱓕󱒅󱒗
 Movetheboomtoapositionwhereitis
easytoadjust.
󱒸󱓙󱓊󱓕󱒅󱒘
 Holdtheenableswitchup
to“ON”ordepressthefoot
switch.Operatetheplatform
leveladjustswitchtoadjust
theleveloftheplatform.
 BleedingAirfromPlatform5‒2
LevelingSystem
Iftheplatformdoesnotstaylevelafter
adjustment,airmayhaveenteredtheplatform
levelingsystem.Inthiscase,bleedairfromthe
platformlevelingsysteminthefollowingway.
DANGER
 Donotallowanypersonorobjecton
theplatformwhenbleedingair.Use
lowercontrolpaneltobleedairfrom
theplatformlevelingsystem.
󱒸󱓙󱓊󱓕󱒅󱒖
 Putthemachineonafirm,levelsurface.
󱒸󱓙󱓊󱓕󱒅󱒗
 Movetheboomtoapositionwhereitiseasy
toadjust.
󱒸󱓙󱓊󱓕󱒅󱒘
 Holdtheenableswitchupto“ON”.Operate
theplatformleveladjustswitchonthelower
controlstofullytilttheplatformforwardand
backwardseveraltimes.
M082L822
PlatformLevelAdjustSwitch
EnableSwitch
fig.8‒32
󱒸󱓙󱓊󱓕󱒅󱒙
 Adjusttheplatformsoitbecomeslevel.
󱒸󱓙󱓊󱓕󱒅󱒚
 Repeattheboomraising,loweringand
telescopingoperationsseveraltimesand
makesurethattheplatformstayslevel.