Aichi SP14DJ User Manual

104 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SP14DJ

OperationManual

withMaintenanceInformation

NOTICE

 Readthismanualbeforeoperatingthemachine.

[OriginalInstructions]

Table of Contents

Questions and Answers:

M
Matthew RodriguezAug 2, 2025
What to do if operations from upper controls are not available on Aichi Boom Lifts?
- G
  Gary JohnsonAug 3, 2025
  If operations from the upper controls are unavailable, several factors could be the cause. First, ensure the engine is running. Next, make sure the foot switch is depressed while operating the controls, except during engine start. Check if the power indicator light on the upper controls is on; if it's off, turn the key switch on the lower controls to the upper controls position. If the power indicator light is flashing, release all controls until it turns on, then try operating again. Finally, if the system failure light is on or flashing, immediately stow the boom and stop using the machine, and contact AICHI or an AICHI dealer for inspections.
J
Jody EdwardsAug 17, 2025
Why does the engine stop on Aichi SP14DJ even if the emergency stop button is not pushed in?
- K
  kimberlylucasAug 17, 2025
  The engine might stop even without pushing the emergency stop button due to several safety features. The engine will stop if the emergency pump switch is operated while the engine is running, but this is normal operation, not a failure. Similarly, pressing the touch switch (bar) will stop the engine, which is also normal. Additionally, the safety device will stop the engine if the boom is shaken heavily, or the platform is pressed against the wall strongly; this is also not a failure.

Aichi SP14DJ Specifications

General

Brand	Aichi
Model	SP14DJ
Category	Boom Lifts
Language	English

Summary

Important Information

Safety Alert Symbol and Signal Words

Explains the meaning of safety alert symbols and signal words used in the manual.

Chapter 1 Safety Rules

Electrocution Hazards

Details hazards associated with electricity and safe distances from power lines.

Tip Over Hazards

Information on preventing the machine from tipping over due to load or ground conditions.

Fall Hazards

Precautions to prevent falling from the platform or the machine.

Collision Hazards

Risks and prevention methods for collisions with obstacles or other machines.

Damaged Machine Hazards

Warnings against operating a damaged or malfunctioning machine.

Fire and Explosion Hazards

Safety measures related to flammables, fuel, and potential ignition sources.

Battery Safety

Precautions for handling batteries, including burn and explosion hazards.

Engine Safety

Safety guidelines for operating the engine, including scald and exhaust hazards.

Personal Safety

Chapter 2 Decals

Symbol and Pictorials Definitions

Safety Signs and Locations

Chapter 3 Safety Systems & Devices

List of Safety Systems

Overview of the machine's safety systems and their functions.

Chapter 4 Part Names and Functions

Upper Controls

Lower Controls

Chapter 5 Workplace Check

Workplace Safety Check

Procedure for checking the work environment for hazards before operation.

Chapter 6 Pre-operation Checks

Function Check

Chapter 9 Emergency Operation

Emergency Stop

How to use the emergency stop button to halt all machine functions.

Emergency Lowering

Procedures for lowering the platform using the emergency pump.

Override Switch

Chapter 12 Troubleshooting

Troubleshooting Chart

Common symptoms, causes, remedies, and refer to sections for troubleshooting.

Diagnostic Codes Chart

Explanation of diagnostic codes, their causes, and countermeasures.

Appendix D Daily Inspection Check Sheet

Inspection Procedures and Checklist

Guidance and checklist for daily pre-operation inspection of the machine.

Related product manuals

Preview: Aichi SR12C