You can click on a field and move it up and down, dragging and dropping it.
The last pushbutton is intended for managing the "Authorizations":
CAN Driver Builder offers TWO different Authorizations:
- Protocol Password: the password that you are supposed to have in your PC for EDITING the protocol
- Measure Protection Key: the key that you are supposed to have in your PC for using, seeing in online,
downloading and seeing in Analysis the measures defined as "locked" in your protocol.
The "locked" measures cannot be shown on the display, but are recorded like any other measure. If you
download the data into a PC with the Measure Protocol Key installed, the locked measures are completely
visible, else they are hidden and crypted.
At the end, "Save" and exit. You will find the new protocol among all the others in the database.
To Next Page
Loading...