SmartyCam
User Manual
Release 1.04
14
www.smartycam.com
19
6.2 – How to switch SmartyCam on/off
SmartyCam can be switched on in two ways:
• pressing “2” button, or
• connecting the external power cable to SmartyCam: as soon as the camcorder
receives the 12 V power, will automatically switch on.
SmartyCam can be switched off in the following ways:
• pressing “2” button any time “Off” option is available
• pressing “2” button for 10 seconds. This forced option is to be used JUST in case of
camcorder lock, as it can lead to cancellation of some of the latest recorded
data/images
• automatic switch-off: if still for 15 minutes, SmartyCam will switch automatically off.
NOTE: this function can be disabled in the “SETTINGS” menu (“AUTO
POWEROFF” function).
28
6.3 – “Online” status (or mode)
When SmartyCam is switched on, three options appear:
• Rec
• Off
• Menu
recording process will start (v. paragraph 6.4)
the camera will switch off (v. paragraph 6.2)
several options appear
Clicking “Menu” a new page will appear, showing (in loop) the following options:
PLAYER
It allows to manage recorded videos: “Down” scrolls the list of
videos and “Sel” selects the desired video. Once selected, it is
possible to view it (“Play”) or cancel it (“Del”)
GPS STATUS
It shows the connected satellites and the signal strength (good or
weak)
SETTINGS
It allows to set several key parameters (v. paragraph 6.3.1)
LAP MNGMT
It shows the geographic coordinates of the place where the
camcorder is positioned. It permits to fix the starting point of GPS
lap times (selecting “Fix”): once a point is fixed, every time
SmartyCam will pass there, a laptime will be registered.
DASH
Info page: it shows the data acquired by the camera (if stand
alone) or by the external acquisition system, ECU or logger (if
slave)
On the top of this page, the functions “Down” (to scroll the options), “Exit” (to go back to
the previous page) and “Sel” (to select the desired option) appear.
To Next Page
Loading...
