Aim Smartycam - Automatic Recording; Smartycam Recording Support

SmartyCam
User Manual
Release 1.04
17
www.smartycam.com
36
6.4.2 –Automatic recording
It is possible to set the automatic recording option (“AUTO REC”). This permits to
start/stop recording without manual input. That’s how it happens:
• In slave mode (SmartyCam connected to an AIM logger): the logger transmits a
start/stop recording input to SmartyCam, as soon as it detects RPM’s or a speed
higher/lower than 10 km/h.
• In stand alone mode: recording starts/stops automatically when speed is more/less
than 10 km/h or acceleration exceeds 0.2 G.
21
6.5 – SmartyCam recording support
SmartyCam kits include a 4 Giga Micro SD but it can support up to 16 Giga.
Warning: use only High Capacity Micro SD like this:
Note: do not remove the Micro SD when SmartyCam is recording or is in “Player”
section (Micro SD icon will be red). Otherwise the Micro SD will be permanently
damaged.