106
Configuring the Station
■ Sound Settings
5.2.1.1 Schedule Settings
How to configure the Weekly Schedule
Configure the time at which to perform relay output for each day of the week, from Sunday to Saturday. 12 schedules
can be set for each day.
Important
• Configure the Authentication Key using 1 to 4 digits if the electrical lock connected to this device will be released by operating
IX-MV.
• Configure a setting value for the Authentication Key that differs from the Authentication Key set in "Communication Audio
Messages" and "Option Relay Control Authentication Key." If the setting value is the same, both functions might operate.
Note
• The "Authentication Key" is displayed as "●●●●●" in the Settings window.
Description Configure the sound for the output terminal.
• Door Release: Configure the tone heard when relay output is performed to release the
electrical lock.
• Relay Control (start): Configure the tone heard when relay output starts via optional relay.
• Relay Control (end): Configure the tone heard when relay output stops via optional relay.
Settings • None
• Call Pattern1
• Call Pattern2
• Call Pattern3
• Call Pattern4
• Call Pattern5
• Call Pattern6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select from the sound source registered in
“Custom Sound Registry (→page 85)”.
Default values Door Release: Operation Sound
Relay Control (start): None
Relay Control (end): None
To Next Page
Loading...
Need help?
General
