107
Configuring the Station
1. Configure the "Start Time" and "End Time" for each day of the week.
2. When done, click [Update].
■ Start Time
■ End Time
How to delete the Weekly Schedule
1. Return settings to their default values, and then click [Update].
Description Set the time when contact output starts.
Settings 00:00 - 23:59
Default values -
Description Configure the time to stop relay output. If this is set earlier than “Start Time (→page 107)”, the
end time will be for the following day.
Settings 00:00 - 23:59
Default values -
To Next Page
Loading...
