Why are flights frozen for too long on AirNav RadarBox?
If flights in AirNav Radar that are no longer providing information remain frozen for too long, it's likely that the hide timeout setting is set too high. To resolve this, reduce the hide timeout setting.
What to do if aircraft are not being hidden on AirNav RadarBox Radar?
If aircraft that have flown out of cover are not being hidden in AirNav Radar, it's likely because the hide timeout setting is too long. You should reduce the hide timeout setting to ensure these aircraft disappear from the display as expected.
How to fix network flights timing out on AirNav RadarBox Radar?
If network flights are timing out too quickly in AirNav Radar, it might be because the timeout setting is less than 30 seconds. To fix this, increase the timeout setting to at least 30 seconds to allow sufficient time for data refresh.
Details the core hardware and software capabilities of the RadarBox system.
Step-by-step guide for installing the RadarBox software and connecting the hardware.
A comprehensive walkthrough of initial setup, application features, and basic operation.
Instructions for setting up alerts for specific aircraft, flight IDs, or conditions.
Describes the main interface tabs including MyFlights, Network, ACARS, and Alerts for data viewing.
Solutions for issues related to connecting the RadarBox hardware to the computer and driver installation.
Addresses common issues encountered when connecting to the RadarBox Network and receiving data.
To Next Page
General