Airo XP Series - 5 Use Instructions; Machine Movement

Use and Maintenance Manual - XP - XLP Series
Page 25
5. USE INSTRUCTIONS
Before using the machine read this chapter thoroughly.
Follow exclusively the instructions given in the next paragraphs and the safety rules described both
hereafter and in the previous paragraphs. Read the next paragraphs carefully in order to properly
understand the on/off procedures as well as all operations and their correct use.
5.1 Machine movement
The machine is not motorised. Before moving the
machine check the working path, making sure that the
ground is suitable to support the machine and then
release both the pedal parking brakes as shown in the
picture aside.
Move the machine into working position by pushing it
with both hands on the handles placed on the entry rail.
For DUAL models there are no handles; use the
uprights of the entry rails. Pay attention during this
procedure to avoid any hands or feet crushing.
Pay attention to the warnings referred to in chapter
3.3.2.
FIG.8
It is forbidden to move the machine with staff on board the platform.