Airo XP Series - Removable Rails

Use and Maintenance Manual - XP - XLP Series
Page 38
6.2.1 Removable rails
The machine is fitted with rails which can be removed from the platform.
Removing the rails it is possible to reduce the height of the machine for:
 carriage
 passage through lowered areas.
To remove the rails remove the four fixing screws.
Make sure the rails are properly secured before using the machine.
FIG.20
WARNING!
This operation is only for reducing the height of the stowed machine to facilitate carrying operations.
It is absolutely forbidden to lift the unit with personnel on the platform if the rails are not raised and fixed.
6.3 Towing the machine.
Towing the machine is not allowed. The holes present on the chassis are only for fixing the machine to
the surface of the transport means.