Use and Maintenance Manual - XP - XLP Series
6.2 Carrying
In order to carry the machine to the various working sites, follow the instructions given below.
Considering the large dimensions of some models, before carrying, it is recommended to inquire about the overall dimension limits
for road transport in force in your country.
Before carrying the machine, turn it off and remove the keys from the control panels. No people are
allowed in proximity to or on the machine to avoid any risks deriving from sudden movements.
For safety reasons never lift or tow the machine by means of its booms or platform.
Loading operations are to be carried out on a flat surface with a suitable capacity, after setting the
platform to rest position (fully lowered).
To carry the machine the operator can load it onto the vehicle
using a lift truck of a suitable capacity (see machine weight in
table “Technical features” at the beginning of this manual)
equipped with forks having at least the same length as the
machine width. Insert the forks as indicated by the stickers on
the machine. Lifting the machine by means of a lift truck is a
dangerous operation, which must be carried out by qualified
operators only.
To Next Page
Loading...