Use and Maintenance Manual - XP - XLP Series
1.5 Control panels
The machine is provided with a single control panel on the platform for the normal use of the machine.
On the ground there is an emergency stop device and the device for manual emergency lowering.
1.6 Drive power
The machines are powered by an electro-hydraulic system consisting of rechargeable accumulators and electric pump.
Both the hydraulic and the electric systems are equipped with all necessary protections (see electric and hydraulic circuit diagrams
annexed to this manual).
1.7 Machine life, demolition and decommissioning
The machine has been designed to last for 10 years in normal operating environments, if properly used and serviced. Within this
period, the manufacturer must carry out a complete inspection/overhaul.
If disposal of the unit is necessary, comply with current local regulations.
In Italy, the demolition/decommissioning must be notified to the local ASL / USL or ARPA.
The machine consists mainly of metal parts which are easy to be identified (steel for the most parts, and aluminium for the
hydraulic blocks); thus, we can state that the machine can be recycled at 90%.
European standards and those transposed by the member countries relating to respect for the environment
and the disposal of wastes envisage heavy administrative and penal fines in case of infringement.
In case of demolition/decommissioning, carefully keep to the provisions of applicable regulations,
especially as regards materials such as hydraulic oil and batteries.
To Next Page
Loading...