MPC2500 Operator’s Manual rev 1.0
11
Other useful functions in the Name window
(Copy and Paste function)
With the copy and paste function, you can copy the
letters in the “New name” field and paste to set a name
to another data. This is useful when you wish to create
similar names for different data.
If you press [F2] (COPY ) key when Name window is
open, the letters in the “New name” field will be cop-
ied (temporarily saved). When you press [F3] (PASTE)
in the Name window , those copied letters can be pasted
to the “New name" field.
Entering number with
Numeric key
In the value fields, such as the sample’ s TRIM page,
you can enter numbers directly by using the numeric
keys.
Example: if you wish enter “100” in a field,
01. Press the cursor key to move the cursor to the filed
you wish to enter a number.
02.
Press the “1”, “0”, “0” keys and then press the [ENTER] key.
If you are entering numbers with a decimal value
such as in the Tempo field in the MAIN page, enter
the number, ignoring the decimal point.
example: if you want to enter 120.5, press the “1”,
“2”, “0”,”5” keys and then press the [ENTER] key.
( In case of 120.0, press the “1”,”2”, “0”, “0” keys and
then press the [ENTER] key). If you make a mistake,
it is possible to cancel by pressing the [SHIFT] key
before pressing the ENTER key.
If you use the [CURSOR] keys, DATA wheel, or
[MAIN] key while you are entering data with the
numeric keys, the input will be canceled and the data
returns to its original status.
In the field where “- / +” can be set, pressing the [ - ]
/ [ + ] toggles the entry between (-) and (+)
To Next Page
Loading...
Need help?
General
