MPC2500 Operator’s Manual rev 1.0
75
Other available edits for Region
By using the Edit function in the ChopShop page, you can
divide one region into two regions or combine continuous
regions into one region. You can also extract the selected
region as another sample.
01. In the ChopShop page, press the [F6] (EDIT) key.
The Region Edit window will be displayed.
02. In the Edit field, select the type you wish to edit.
EXTRACT
You can extract the selected region as another sample.
03. In the Edit field, select the EXTRACT.
Region: You select the number of the region
you wish to extract.
New sample: You can select a new name for the
new sample.
04. Press the [F5] (DO IT) key.
The MPC2500 will start the extract process. Press-
ing [F4] (Cancel) will cancel the extract.and the dis-
play go back to the ChopShop page.
DIVIDE REGION
You can divide the selected region to two regions.
03. In the Edit field, select DIVIDE REGION.
Region: You select the number of regions you
wish to divide.
04. Press the [F5] (DO IT).
The MPC2500 will start dividing regions. Pressing
[F4] (Cancel) will cancel the process and the dis-
play will go back to the ChopShop page.
COMBINE REGION
You can combine the continuous regions to one region.
03. In the Edit field, select COMBINE REGION.
Region : You select the numbers of regions you
wish to combine.
For example, if you set this 1-5, the regions from 1
to 5 will be combined.
04. Press the [F5] (DO IT) key.
The MPC2500 will start combining the regions.
Pressing [F4] (Cancel) will cancel the process and
the display will go back to the ChopShop page.
To Next Page
Loading...
Need help?
General
