C319 Series Indoor Monitor Administrator Guide
Parameters Set-up:
•
Location: to select which location the detection device is in, including Bedroom,
Guest room, Hall, Window, Balcony, Kitchen, Study andBathroom.
•
Zone type: to select which type of detection device, including Infrared, Drmagnet,
Smoke, Gas, and Urgency.
•
Defence delay: it means when users change the arming mode from other modes,
there will be 90 seconds delay time to get activated.
•
Alarm delay: it means when the sensor is triggered, there will be 90 seconds delay
time to announce the notification.
•
Status: to enable or disable Arming Mode on the corresponding Zone.
14.2.4
Configure Alarm Text
After the alarm sensor is set up, you are allowed to customize your alarm text shown on
the screen when an alarm is triggered on web Arming> Zone Setting > Zone Setting
interface. Enter the alarm text for the alarm at each location according to your need.
To Next Page
Loading...
Need help?
General
