C319 Series Indoor Monitor Administrator Guide
Parameter Set-up:
•
Send SIP Message: enable it before you can send the customized messages to a
designated SIP number or an IP number when the alarm is triggered.
•
SIP message: type in the message you want to send to the designated SIP number or
IP number when the alarm is triggered.
14.2.8.2
Configure Alarm Action via SIP Call
To set up the call action, you can enter the SIP or IP number of the device to be called as
an action, then enable Alarm Siren for arming zone as needed.
Parameter Set-up:
To Next Page
Loading...
Need help?
General
