Alba MC250 - Adjusting the Spindle and Fixing the Base to the Ground

MC250 page 13 of 78
MC250 Rev.02-USA  (+34) 944 71 16 00  (+34) 944 53 17 54  export@alba.es www.alba.es
2.5.2 Adjustingthespindleandfixingthebasetotheground
The MC250 has two regulation spindles at the base to ensure that the mast is vertical and
paralleltothescaffoldtubes.








Oncetheheightisadjusted,wewillfixthebasetothegroundbymeansoftwoanchoringspits
thatwewillinsertintotheholesofthespindlebase:






WARNING:
Fixthebasetothegroundtopreventtheliftfromslipping.Iftheanchoringit´snot
possible,firstanchoragetostructureshallbeat1m(3ft3.37in)aprox.
Spindles
Anchoring points