MC250 page 4 of 78
MC250 Rev.02-USA (+34) 944 71 16 00 (+34) 944 53 17 54 export@alba.es www.alba.es
floorsforliftingorloweringmaterialsandpersonsinafastandsafeway.Below,pleasefind
themainpointstobearinmindpriortoerectionanduseofthemachine.
The hoist is designed for transsporting only loads.Itcanbeusedfortransporting
materials during building construction, and also for hoisting scaffolding components
forassemblingscaffoldstructures.
Themachinerunsvertically,gearedtothemastrackandguidedwithsupportrollers.
Loadingandunloadingoperationsmustbecarriedoutbytrainedpersonnel.
Machine operation must be carried out by appointed personnel trained in hoist
operation.
The machineisdesignedto be fixedatsuitableintervalstoa load‐bearing structure,
mainlyascaffoldingstructure,oralsothefloorslabsofaconstructionsite,ametal
structure,orsimilar.ALBA‐MACRELGROUP,S.L.includesinthemachinemanualallthe
informationrelatedto theloadstransmittedtotheverticalsupport structureandto
theground.Itistheresponsibilityofthetechniciansattheinstallationsitetoensure
that both the support structure and the ground support the loads indicated by the
manufacture.
WARNINGSYMBOLS:
1.3. Technical data and safety systems
Standardcarrier
Dimensions 900x500x900mm 35.43x19.68x35.43in
Maximumcapacity 250kg 550lb
Carrier for
scaffoldparts
Dimensions 900x500x1800mm 35.43x19.68x70.86in
Maximumcapacity 250kg 550lb
Verticalspeed 20m/min(65ft/min)
Motor 3phase1,5kW230V50/60Hz
Maximumheight 30m(98ft5.1in)
Distancebetweenanchorages(max.) 3m(9ft10.11in)
Firstanchorage(aprox.) 1m(3ft3.37in)
Noisseemissionvalue >70dB
WARNING:
MAIN SAFETY INSTRUCTION DURING INSTALLATION OR OPERATION IS TO BE
ENTEREDINTEXTBOXESLIKETHIS,INCLUDINGWARNINGSYMBOL(LEFT).