EasyManua.ls Logo

Alba MC250 - Parachute Drop Test; Manufacturer Test; Test During Use

Alba MC250
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MC250 page 42 of 78
MC250 Rev.02-USA (+34) 944 71 16 00 (+34) 944 53 17 54 export@alba.es www.alba.es
4.4. Parachute drop test
4.4.1 Manufacturertest
ALBAMACRELGROUPS.L.performsanintegrationtestoneachlift during assembly of the
machinetoensuresafetyandcorrectoperationofthedevice.
4.4.2 Testduringuse
Periodically,every4months,oraftereachmachineassemblyafunctionaltestoftheparachute
shallbeperformedinaccordancewiththeinstructionssetoutbelow.Thetestoftheparachute
mustbefurthersupplementedwithabrakeinspection,checkingthecorrectappearanceofall
theelementsandthesealingoftheoutercover.Thisprocesshastoberepeatedmoreoftenif
themachineoperatesinextremeenvironmentalconditions.
Testprocedure:
Raisethehoistapproximately1,5m(4ft11.05in).
Tieacabletothebrakeleverandpullitdiagonally,alwaysoutoftravelwayofthehoist.
Pullthecablebydroppingtheliftuntiltheparachuteactivatesandthemachinestops.
WARNING:
Carry out a parachute drop test at the end of each assembly, and then repeat
periodicallyevery4months.
WRITETHERESULTINTHEUSERS´SMANUALRECORD.
WARNING
The own screws of the brake must not be manipulated under any concept, to
guaranteethecorrectoperation.

Table of Contents