Alba MC250 - Emergency Descent; Checking Hoist Operation before Commissioning

MC250 page 38 of 78
MC250 Rev.02-USA  (+34) 944 71 16 00  (+34) 944 53 17 54  export@alba.es www.alba.es
3.3. Emergency descent
The MC250 has a lever on the motor that will allow emergency lowering in the event of a
powerfailure.













3.4. Checking hoist operation before commissioning
Beforehoistcommissioning,hoistserviceresponsiblehastocheckifhoistisincompliancewith
followingpoints:
 Hoistisinstalledwithalloperationalsafetysystems:
 Portablecontrolbuttonsworkcorrectly
 Superiorendtrackswitchstopshoistbeforereachingsuperiorendtrackbuffers.
 Inferiorendtrackswitchstopshoistbeforereachingbasebuffers.
 Mastpresencedetectorworkscorrectly.
 OUTOFSERVICEredlightindicatorworkscorrectly.
 No existen interferencias entre el elevador y elementos exteriores, mástil, anclajes,
There´snointerferenceofhoistandexternalitems,mast,ties,supportingstructure.
 Inferioraccessareatothehoistisdemarcatedandprotectedproperly.
WARNING:
Theoperatorshouldmovetheleversmoothlysothattheemergencyloweringoccurs
slowly.Iftheparachuteactivationspeedisexceeded,itwilllock,preventingdescent.
