Alba MC250 - Use of the Machine; Introduction; Using the Portable Push Button Control Panel

MC250 page 36 of 78
MC250 Rev.02-USA  (+34) 944 71 16 00  (+34) 944 53 17 54  export@alba.es www.alba.es
3. USE OF THE MACHINE
3.1. Introduction
Thehoisthasapointofcontrolexclusivelyconnectedtobaselevelpanel.Allthemovements
shallbeperformedwithhold‐to‐runbutton.

3.2. Using the portable push button control panel
Usetheportablecontrolpanelfromapositioninwichyouhavevisualaccesstothefullhoist
railway.
















WARNING
Itisforbiddentooperatethehoistifyoudonothavevisualaccesstotheentirelift
travel.

WARNING:
Hoistcanonlybeusedbythedesignatedpersons,whohavebeeninstructedinthe
safelyhoistoperation.