Alba MC250 - Actions to Take if Safety Device Is Activated

MC250 page 44 of 78
MC250 Rev.02-USA  (+34) 944 71 16 00  (+34) 944 53 17 54  export@alba.es www.alba.es








4.4.3 Actionstotakeifsafetydeviceisactivated
Theparachuteactsincasethespeedexceedsthepredeterminedspeed.Thiscanonlyhappenif
wearetestingtheparachuteorinthefollowingcases:












WARNING:
Ifthetestisincorrect,theprocessmustberepeatedfromthebeginning.Ifthetest
iscorrect,theresultwillberecordedinthemaintenancelog.

WARNING:
Whentheparachuteisactivatedthehoistcannotgodown.

Power failure or electrical malfunction
Badly performed emergency descent
(without taking into account the procedure)
Interlocking speed exceeded
Accident or estructural failure
Pinion disengage or gearmotor shaft
breaking
PARACHUTE ACTIVATION
PARACHUTE ACTIVATION
Reactivar el paracaídas pulsando el
botón de subida en el mando
Cease machine operation