PM266A PRO/ PM266A
21
DRAM Support
DDR (Double Data Rate) SDRAM (Synchronous DRAM) is supported.
general, you can use the arrow keys to highlight items, press <Enter> to select, use the <PgUp>
Supported CPUs
This PHOENIX-AWARD™ BIOS supports the Intel
®
Pentium
®
4 CPUs.
Key Function
In
and <PgDn> keys to change entries, press <F1> for help and press <Esc> to quit. The following table
provides more detail about how to navigate within the BIOS Setup program.
Keystroke Function
Up arrow Move to previous item
Down arrow Move to next item
Left arrow Move to the item on the left (menu bar)
Right arrow Move to the item on the right (menu bar)
Esc Main Menu: Quit without saving changes
Submenus: Exit Current page to the next higher level menu
Move Enter Move to the item you desire
PgUp key Increase the numeric value or enter changes
PgDn key Decrease the numeric value or enter changes
+ Key Increase the numeric value or enter changes
- Key Decrease the numeric value or enter changes
Esc key Main Menu – Quit and do not save changes into CMOS
tup Menu and Option Page Setup Menu – Exit Status Page Se
Current page and return to Main Menu
F1 key General help on Setup navigation keys
F5 key Load previous values from CMOS
F6 key Load the defaults from BIOS default table
F7 key Load the turbo defaults
F10 key Save all the CMOS changes and exit
To Next Page
Loading...
