PM266A PRO/ PM266A
30
Options: Auto (default)、3、4、5、7、9、10、11、12、14、15
PU Clock Ratio
U has not been set to a locked state by the CPU manufactory. If
. Options: depends on CPU.
pread Spectrum
EMI (Electromagnetic Interference) generated.
Disabled
speed
Host frequency * DDR:CPU Ratio)
Frequency/Voltage Control
C
This field will only display if the CP
your CPU is locked, you will not be able to adjust the “CPU Clock Ratio”
S
The Spread Spectrum function can reduce the
Options: Enabled (default)、
CPU Host Frequency (MHz)
This item displays the CPU Host Clock. You can set it from 100 to 233. The default depends on your
CPU frequency. Default: By CPU
DRAM Clock
This item displays the DDR Speed. (CPU
Options: By SPD (default)、DDR200、DDR266
(Note: When you install a CPU that have clock speed is 133 MHz, it will only show one option of
DR266.) D
To Next Page
Loading...
