Albatron PM266A PRO - Video off Option; Video off Method

PM266A PRO/ PM266A
36
3. User Defined (default)
Allows you to set each mode individually.
W
H
hen this option is enabled, the “suspend mode” time is configurable from 1 minute to 1 hour. The
DD Power Down, which ranges from 1 min. to 15 min. and includes a “disable” option.
ote: If you select Min. or Max. Power Saving modes, the “HDD Power Down” value and the
uspend Mode” value are both fixed.
DD Power Down
hen enabled, the hard disk drive will power down after a certain configurable period of system
activity. All other devices remain active.
ptions: Disabled (default)、1 Min、2 Min、3 Min、4 Min、5 Min、6 Min、7 Min、8 Min、9 Min、
0 Min、11 Min、12 Min、13 Min、14 Min、15Min
uspend Mode
his item allows you to select the period of inactivity before the system is suspended or put into
spend mode. Options: Disabled(default)、1Min、2Min、4Min、6Min、8Min、10Min、20Min、
0Min、40Min、1Hour
nitor power management.
ptions: Suspend→Off (default), Always On.
YN e system to turn off the vertical and
ports and write blanks to the video buffer.
nk Screen (default) This option only writes blanks to the video buffer.
anagement signaling.
se IRQ
Q. Options: 3 (default)、4、5、7、9、10、11、NA.
N
er button for more than 4 seconds forces the system to enter the
Sec, Instant-Off (default).
N
“S
H
W
in
O
1
S
T
su
3
Video Off Option
This field determines when to activate the video off feature for mo
O
Video Off Method
This option determines the manner in which the monitor goes blank.
Options:
V/H S C+Blank This selection will cause th
horizontal synchronization
Bla
DPMS Support Initial display power m
Modem U
This determines the modem’s IR
Soft-Off by PWRBT
Pressing the pow
Soft-Off state when the system has “hung.” Options: Delay 4