PM266A PRO/ PM266A
45
Problem 10:
f you continue to experience problems.
en.
2. Call technical support.
olutions: Check hard drive cable.
stalling a second hard drive.
1. Master/slave jumpers not set correctly.
re not compatible / different manufacturers.
aster/slave jumpers correctly.
ram and select the correct drive types. Call drive manufacturers for
roblems with other drives.
tup and select the correct drive type.
Solutions: Replace keyboard.
Keyboard failure.
Causes: Keyboard is disconnected.
Solutions: Reconnect keyboard. Replace keyboard i
Problem 11:
No color on scre
Causes:
1. Faulty Monitor.
2. CMOS incorrectly set up.
Solutions:
1. If possible, connect monitor to another system. If no color appears, replace monitor.
Problem 12:
The screen displays “C: drive failure.”
Causes: Hard drive cable not connected properly.
S
Problem 13:
Cannot boot the system after in
Causes:
2. Hard drives a
Solutions:
1. Set m
2.Run SETUP prog
ility ppossible compatib
Problem 14:
Missing operating system on hard drive.
auses: CMOS setup has been changed. C
Solutions: Run se
Problem 15:
Certain keys do not function.
Causes: Keys jammed or defective.
To Next Page
Loading...
