Alcatel-Lucent 1830 PSS-16 - Page 425

Corrective Action
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
1
Remove the loopback from the port.
CLI config interface <shelf slot port>
loopback terminal disabled
LSPOW_ALM_W
LSPOW_ALM_W (Laser Back-Facet Optical Power Cross
Threshold)
Severity Major
Service affecting? No
Applicability 43STX4P
Corrective Action
NOTICE
Service-disruption hazard
A cold reset, reseat, or replacement of a card is service impacting if the card is currently
carrying services. To determine if any services are currently carried over a card, perform
the procedure “Reseating a Card” (p. 3-19).
If
there are services currently carried over the card, it may be best to wait for a
maintenance window before resetting, replacing, or reseating the card.
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
1
If another card failure is reported on the card, follow the procedure for that specific alarm.
Trouble-clearing procedures
LPBKTERM
LPBKTERM (Diagnostic (Terminal) loopback active)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
2-175
E ND OF STEPS
...................................................................................................................................................................................................