Restoring a Database
Restoring the Database Using the WebUI
...................................................................................................................................................................................................
1
Select Administration > Database > Backup and Restore.
Result: The Backup and Restore window is displayed.
...................................................................................................................................................................................................
2
Enter the values for the fields on this window as described in Table 3-1, “Database
Backup and Restore Parameters” (p. 3-13).
...................................................................................................................................................................................................
3
Click Apply > Restore, or if you want to use your previous serial number, click Force
Restore
.
Firmware
Selecting a Specific Firmware Version
Having completed the first steps of an in-service software upgrade, you may find that one
or more firmware conditions have been raised against cards in your system. Firmware
upgrades may be available, recommended, or required on these cards depending on the
resulting alarm condition. When you elect not to upgrade the firmware, having
understood the subsequent effect on your operations, use the following procedure to
maintain the current firmware in the cards.
Affected cards will have the following conditions raised against them:
• FWUPGRADEPENDING - Firmware upgrade pending
• FWVERSIONNOTDEFAULT - Firmware version loaded is not the preferred version.
Supporting procedures
Database Backup and Restore
Restoring a Database
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-14
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
E ND OF STEPS
...................................................................................................................................................................................................
To Next Page
Loading...
