Alcatel-Lucent 7705 SAR - Page 122

Security Command Reference
122 7705 SAR OS System Management Guide
accounting-port
Syntax accounting-port port
no accounting-port
Context config>system>security>radius
Description This command specifies a UDP port number on which to contact the RADIUS server for accounting
requests.
Parameters port — specifies the UDP port number
Values 1 to 65535
Default 1813
authorization
Syntax [no] authorization
Context config>system>security>radius
Description This command configures RADIUS authorization parameters for the system.
The no form of this command disables RADIUS authorization for the system.
Default no authorization
port
Syntax port port
no port
Context config>system>security>radius
Description This command configures the TCP port number to contact the RADIUS server.
The no form of the command reverts to the default value.
Default 1812 (as specified in RFC 2865, Remote Authentication Dial In User Service (RADIUS))
Parameters port — the TCP port number to contact the RADIUS server
Values 1 to 65535