Security
7705 SAR OS System Management Guide 123
retry
Syntax retry count
no retry
Context config>system>security>radius
Description This command configures the number of times the router attempts to contact the RADIUS server for
authentication if there are problems communicating with the server.
The no form of the command reverts to the default value.
Default 3
Parameters count — the retry count
Values 1 to 10
server
Syntax server server-index address ip-address secret key [hash | hash2]
no server server-index
Context config>system>security>radius
Description This command adds a RADIUS server and configures the RADIUS server IP address, index, and key
values.
Up to five RADIUS servers can be configured at any one time. RADIUS servers are accessed in order
from lowest to highest index for authentication requests until a response from a server is received. A
higher-indexed server is only queried if no response is received from a lower-indexed server (which
implies that the server is not available). If a response from a server is received, no other RADIUS
servers are queried. It is assumed that there are multiple identical servers configured as backups and
that the servers do not have redundant data.
The no form of the command removes the server from the configuration.
Default no RADIUS servers are configured
Parameters index — the index for the RADIUS server. The index determines the sequence in which the
servers are queried for authentication requests. Servers are queried in order from lowest to
highest index.
Values 1 to 5
To Next Page
Loading...
