· Select the relevant equipment
· Add The 3-note tone indicates that the handset has been installed correctly (the LED
flashes green or orange depending on the battery charge level)
Error messages
The Bluetooth® handset emits a sequence
of 4 beeps
Your set is an older generation than yo
7.24 Use of the Bluetooth® handset
The Bluetooth® cordless handset permits the user to answer and converse with complete freedom
within a radius of 10 meter from the set.
The handset has a LED and two buttons.
Light
· Green flashing: normal operation.
· Green steady: handset charging.
· Orange flashing: battery charge low or handset outside coverage zone.
· Orange steady: malfunction.
Off-hook/On-hook and Volume/Mute keys
· Off-hook/On-hook: press this key to take or terminate a call.
· Volume/Mute:
o Short successive presses to change the handset volume level (3 levels)
o Long press to ensure your correspondent no longer hears you
If the Bluetooth® handset is on its base, you do not need to press the Off-hook/On-hook key to take or
terminate the call. Just off-hook/on-hook the Bluetooth® handset
7.25 Installing a Bluetooth® Wireless Technology headset (matching)
A multi-point Bluetooth headset can be provided by Alcatel-Lucent.
This headset can be matched to your mobile phone and other communication devices at the same
time. For example, you can use the headset matched to your mobile and when you enter your office
the headset automatically matches to your office set too.
You can then answer a call using your Bluetooth headset or the Bluetooth Handset on the office set.
Before a Bluetooth® headset can be used, it must be correctly matched to the terminal. Before
performing the matching operation, the headset must be in detectable mode.
· Reach the "Menu" page
·
Settings Phone Bluetooth Add device
To Next Page
Loading...
