8AL90314ENAAed01 27 /70
3.6 N-party conference (more than three)
If allowed by the system, you can establish an N-party conference (more than three callers including
you).
You are on a call with one or more contacts.
Add a new participant to the conference - N-party conference
Call the participant to add.
You can directly call the person by dialing his/her number, select the person to call from the
call log, or use the search by name feature to call the second person.
Call You are in conference mode.
You can add new participants to the conference by following the same procedure.
To end the conference
Use one of the following:
o End conf Confirm.
o Leave conf The other participants can continue the conference without you.
o Remove participant.
You can remove a participant from the conference.
You must first select the participant you want to remove from the conference.
o Hang up the handset.
3.7 Mute, so that your caller cannot hear you
During the call, you do not wish your caller to hear you.
Use one of the following:
o Press your phone Mute key.
Mute mode is activated (The key is blue).
Your caller can no longer hear you.
Press the key again to go back to normal mode.
o Press and hold the Mute key of the Bluetoothø Wireless handset.
Press the key again to go back to normal mode.
3.8 Voice frequency
During a conversation you sometimes have to send DTMF signals, such as with a voice server, an
automated attendant or a remotely consulted answering machine.
Enter the requested codes.
To Next Page
Loading...
