8AL90314ENAAed01 31 /70
Starting a video conference by directly adding a participant.
You are on a video call.
Add participant.
Call your caller.
Once your contact answers, the previous ongoing video is retrieved as it was before adding the new
contact, and the video is automatically broadcasted on the phone of the new contact. In order to see
the video from the new contact, he/she has to press on the "picture in picture" feature to authorize
the video to be sent from his/her phone.
During the conference call, you can consult the participants 'contact card' without stopping the video.
You can display or hide the list of the participants in the conference by pressing on the arrow next to
the conference label.
To end the conference
Use one of the following:
o End conf Confirm.
o Leave conf The other participants can continue the conference without you.
o Hang up the handset.
4.8 Scheduled video conference
Scheduled conferences are possible by using specific OpenTouch applications. To join a scheduled
conference, you will be required to call a dedicated number and then enter a participant or manager
code. Please refer to your administrator for more information.
When you are in the video conference, the video seen on each participating phone is the video sent by
the contact who is currently speaking.
Once you join the conference, in order to see the video, you must authorize video from your phone by
pressing on the 'picture in picture' feature.
Press on the ‘picture in picture’ feature to authorize the video to be sent from your
phone.
To Next Page
Loading...
