Alcatel-Lucent OpenTouch 8088 - AUTOMATIC LOCK; ADJUSTING THE AUDIO FUNCTIONS; ACTIVATE;DEACTIVATE SILENT MODE

8AL90314ENAAed01 42 /70
Unlock your terminal

 Enter your password to unlock the phone.
By default, the password is your OpenTouch password. If necessary, refer to your administrator to find
out your password.
8.3 Automatic lock
When your phone’s backlight goes off, the phone is locked at the same time.
Activate the automatic lock
 Settings
 Application Lock Lock on backlight off
 Enable the feature.
Set the time-out duration for the phone backlight and lock
 Settings
 Device Display Backlight time-out
 Set the time-out duration for the phone backlight.
Unlock your terminal

 Enter your password to unlock the phone.
8.4 Adjusting the audio functions
 Settings
 Device Audio
 Your handset allows you to set different ring tones depending on the type of incoming call.
o On-site ringing: ring tone for internal call.
o Off-site ringing: ring tone for external call.
o Special ringing: ring tone when the Bluetooth headset is out of range.
o Event ringing: future use.
 Select the ring to associate with each type of call.
 Validate your choice.
Ok
8.5 Activate/deactivate silent mode
 Settings
 Device Audio Silent ringing
 Enable or disable the feature.