• Play Tone
• Make SIP Voice Call
• Make SIP Call with Tone
Tone/Pre-recorded Announcement (Action – Play Tone / Make SIP call with Tone)
Select a recording or tone to use. Custom audio files may be used and uploaded though System → File Manager.
Extension to Dial (Action – Make SIP Voice Call)
SIP account required in Page Extension fields in order to make a call. Can be configured if ‘Make SIP Voice Call’ or
‘Make SIP Call with Tone’ actions are enabled under ‘Call Button Settings’.
Interval Between Tones (Action –Make SIP call with Tone)
Specify the time delay (seconds) between tones. Can be configured if ’Play Tone’ or ‘Make SIP Call with Tone’ actions
are enabled under ‘Call Button Settings’.
Maximum Tone Duration (Action – Play Tone / Make SIP call with Tone)
Select the maximum tone duration. The tone will be terminated once the maximum time is reached. Can be
configured if ‘Play Tone’ or ‘Make SIP Call with Tone’ actions are enabled.
Tone Multicast Settings
Use Separate Multicast
This allows the tone to be played via multicast even if the 8301 is configured as receiver. See additional options when
enabled.
• Multicast Mode
• IP Address
• Port
Outbound SIP Call Settings
Outbound Ring Limit
Typically set to ensure that a call will not reach voicemail. This feature, under ‘Outbound SIP Call Settings’, can be used
to set a limit on how long the speaker will ring before timing out.
To Next Page
Loading...
