Admin Password
Old Password
Enter the old password.
Password
Password to log into the 8301 web interface. You should change the default password algo to secure the device on
the network. If you have forgotten your password, you will need to perform a reset using the Reset Button to restore
the password (as well as all other settings) back to the original factory default conditions.
For additional password security see “Force Strong Password” below.
Confirmation
Re-enter network admin password.
General
Device Name (Hostname)
Name to identify the device in the Algo Network Device Locator Tool.
Introduction Section on Status Page
Allows the introduction text to be hidden from the login screen.
Show Status Section on Status Page when Logged Out
Use this option if you wish to block access to the status page when logged out. The settings and configurations, on the
status page, will be hidden entirely unless you’re logged in – this feature is useful when you want only trusted users to
view possible sensitive device information.
Display Switch Port ID on Status Page
Enable this option to display the Switch Port ID. This option requires the 8301 to be connected to a switch that
supports LLDP or CDP.
Web Interface Session Timeout
Set the maximum period of inactivity after which the web interface will log out automatically.
Play Tone at Startup
A tone can be played at start up to confirm that the device has booted.
To Next Page
Loading...
