EasyManua.ls Logo

Alinx AXKU15 - Page 6

Alinx AXKU15
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AXKU15 User Manual
6/51
www.en.alinx.com
www.en.alinx.com
PCIe3.0 x16 interface
It supports PCI Express 3.0 standard, provides standard PCIe x16 high-speed data transmission interface, and the
communication rate of single channel can be up to 8GBaud.
2 * FMC HPC interface
Eight high-speed transceivers in the FPGA are connected to high-speed pins dedicated for the FMC HPC, wherein
one FMC interface leads out 34 pairs of LA signal differential pairs, 2 pairs of clock signals and 24 pairs of HA
signals; The other FMC interface leads out 34 pairs of LA signal differential pairs and 2 pairs of clock signals, which
can meet the requirements of high-speed signal transmission, comply with the FMC standard, and can be used for
various FMC modules (HDMI input and output modules, high-speed AD modules, etc.).
1 * Gigabit network interface
Gigabit Ethernet interface chip uses JL2121D Ethernet PHY chip to provide network communication services for
users. The chip supports 10/100/1,000 Mbps network transmission rate; Full-duplex and adaptive.
2 * MIPI input interface
Onboard two MIPI lanex4 input interfaces, supporting up to 2.5Gb/s, is used to connect MIPI camera module.
USB Uart interface
One Uart to USB interface is used to communicate with the computer, which is convenient for users to debug. The
serial port chip adopts the USB-UAR chip of Silicon Labs CP2102GM, and the USB interface adopts the MINI USB
interface.
Micro SD deck
One Micro SD deck for storing OS images and file systems.
2 * SATA interface
Two standard SATA interfaces can be used to connect SATA peripherals, such as solid-state drives with SATA
interfaces.
JTAG debug port
One 10-pin 2.54 mm standard JTAG port is used to download and debug the FPGA program. Users can debug and
download the FPGA system through the XILINX downloader.
Led light
7 LEDs, 3 on the module and 7 on the base board. 1 power indicator on the module; 1 DONE configuration
indicator and user indicator. There is one power indicator, four user indicators, and two serial port indicators on
the base board.
Key
4 user buttons on the base board.

Related product manuals