Electronic Door Fittings of the PegaSys Series 7
General data
Fire protection Certified according to DIN 18273 for fire protection and smoke control
doors
Signaling Visual and audible signals
Booking memory Roll storage for the last 2000 bookings and 100 system messages
Standards DIN 18273, EN 179
Power supply
Battery PegaSys B 2.1: 3 x AA lithium batteries
PegaSys S 2.1: 3 x AAA lithium batteries
Battery life Up to 50,000 opening cycles, depending on the reading technology, the
design, the installation conditions and the operating modes.
Environmental conditions
Operating temperature (*) -20 °C to +60 °C
Large variations in temperature will reduce the lifetime of the batteries.
Protection category (*) Certified IP 55
Humidity (*) 95 %, non-condensing
(*) Basic requirement: Inside battery case and outdoor kit
1.2.2 Technical data of the Office series
General data
Material Exterior fitting and interior fitting:
Cast metal housing with top quality powder coating, glass front and fixed
pivot handle made of stainless steel
Total weight Approx. 2600 grams
External dimensions including
electronics (HxWxD)
295 mm x 52 mm x 30 mm
Internal dimensions excluding
electronics (HxWxD)
295 mm x 52 mm x 20 mm
Available backset Min. 30 mm
Square spindles 8 mm, 8.5 mm, 9 mm, 10 mm, (others available on request)
Center-to-center distance 70, 72, 74, 78, 85, 88, 90, 92, 94 mm
Locks Standard locks with retracting latchbolt on cylinder (exchange); panic
locks with self-locking mechanism
Emergency opening By means of equipped cylinders or simultaneously locking mechanical
cylinders (optionally also available without cylinder cutout)
Signaling Visual and audible user information
Booking memory Roll storage for the last 2000 bookings and 100 system messages
Color Black or white
To Next Page
Loading...
Need help?
General
